Short Lead Time for Ptfe Filter Cartridge For Air - Ingersoll Rand Air Oil Separators – Airpull (Shanghai) Filter

This Ingersoll Rand screw air compressor dedicated air oil separator applies the ultra-fine glass fiber manufactured by American HV or Lydall Company. It is designed to remove at least 99.9% of the vaporous oil mixtures from the compressed air. In addition, the newly developed two-component adhesive which comes with higher bonding strength, is used to allow the separator to work normally even under the temperature of above 120℃.

Also, this type of air oil separator could be external or built-in type. With nearly 20 years of manufacturing experience, our company is familiar with thousands of production technologies. That is to say, we can offer high-grade OEM service. We also can design the separator used for the screw air compressor of any brand, for instance, Atlas Copco, Sullair, Fusheng, Compare, etc.

Working Principle

This product uses the micron glass fiber to separate the vaporous oil from the compressed air. Then large oil drops coalesced from the vaporous oil will be accumulated under the affect of gravity. Finally, the accumulated oil will turn back to the oil line of the compressor. In this regard, this micron separation minimizes the oil consumption of the air compressor.

Parameters

1. Initial Saturation Pressure Drop: ≤0.02 MPa

2. The Oil Content after Separated: ≤5 ppm

3. In the case that the pressure drop is no more than 0.1MPa, the oil separator can be used for at least 4,000 hours.

Remark: the above parameters are obtained under the conditions of rated working pressure and rated flow. Besides that, the maximum temperature is no more than 120℃. And the DAH lubrication oil ruled by GB/T7631.9-1997 is used. Prior to the separating, the oil content is no more than 3000ppm.

Related Names

Centrifugal Oil Separator | Rotary Screw Compressor Accessories | Air Compressor Distributor